This is a 3 arm set of cam arms designed for the OEM factory 2018 WildCat XX primary clutch.
New improved profile that provides a harder up shift than the Original Supertips. We are very pleased with testing results on the race track and chassis Dyno this past season. We found faster ETs along with an added 3+hp to the track during Dyno tuning. An excellent choice for drag racing or aggressive trail riding.
You have the capability of adding 32 grams of weight per arm for adjustment. The design includes the option of adding large quantity of weight to three different areas on both sides of the cam arm to create the shifting characteristics you desire. Each arm can be assembled with tungsten and steel washers in a variety of combinations to achieve the desired operating RPM. The SUPERTIPS will fit all primaries. They will also fit the Arctic Cat large pin primaries and have set screw for securing them. Our tungsten washers weigh 7 grams each. There is no other arm on the market that allows this wide range of adjustment.
These SUPERTIPS are a drop in piece that requires no modifications to your primary.
These SUPERTIP Cam Arms are not recommended at RPM ranges above 9000 RPM
Our fastener kit comes with the following hardware:
Supplied per arm:
- 2 - tungsten inserts - 7 grams each
- 18 - washers - 1 gram each
- 4 - O-rings
- 12 - M3 x 6 long screws
- 2 - Set Screws
Supplied per kit:
- 1 - 222 Loctite® - 1ml
- 1 - T-10 Torx Driver