Loading... Please wait...

Arctic Cat Z1/ProCross Drag Race Cam Arm 1672AXEZ1

Hover over image to zoom

  • Image 1
$217.00
SKU:
1001378
Shipping:
Calculated at checkout

 Product Description

These cam arms were specifically designed for the Z1 Turbo upgrade. This a new proven and tested design that is prefered by Z1 tuners. These arms have a large hump on the back that creates more engagement and more load when the turbo needs it.   Available in a 72 gram base with the capacity of adding 42 grams per arm for adjustment.  This design allows the option of adding a large quantity of weight to three different areas on both sides of the cam arm to create the shifting characteristics you desire.  Each arm can be assembled with tungsten and steel washers used in various combinations to achieve the desired operating RPM.  The SUPERTIPS will fit the stock ZI primary but will require a .06 spider shim to be installed. Our tungsten washers weigh 7 grams each. There is no other arm on the market that allows this wide range of adjustment

These SUPERTIP Cam Arms are not recommended at RPM ranges above 9000 RPM 

Each arm can be assembled with the following hardware kit:

Supplied per arm:

  • 2   - 7 gram tungsten inserts 
  • 18 - 1 gram washers 
  • 4   - O-rings 
  • 12 - M3 x 6 long screws 
  • 2  -  set screws 

Supplied per kit : 

  • 1 - 222 Loctite®-1 ml 
  • 1 - T-10 Torx Driver 

 

 Find Similar Products by Category

Vendors Other Products

You Recently Viewed...

Click the button below to add the Arctic Cat Z1/ProCross Drag Race Cam Arm 1672AXEZ1 to your wish list.