Notched Drag-Race Cam Arms for Turbo Sleds

Calculated at Checkout


Made specifically for higher engagement aggressive drag racing applications with an all new flatter profile specifically for turbo models. Made with a healthy engagement notch. The notched arms were designed for the Rage primary and will also fit Arctic Cat fixed pin primaries and have a set screw for securing them. They can be ordered with a bushing and ran in ¼" pin clutches from Polaris, Comet and older style Arctic Cats.  

Available in 72 grams with the capacity of adding an additional 42 grams per arm for adjustment.

This design allows the option of adding a large quantity of weight to three different areas on both sides of the cam arm to create the shifting characteristics you desire.  Each arm can be assembled with tungsten and steel washers which can be used in various combinations to achieve the desired operating RPM.  Our tungsten washers weigh 7 grams each. There is no other arm on the market that allows this wide range of adjustment.

The SUPERTIPS are a drop in piece that requires no modifications to your primary. 

 These SUPERTIP Cam Arms are not recommended at RPM ranges above 9000 RPM 

Each arm can be assembled with the following hardware kit:

Supplied per arm:

  • 2   - 7 gram tungsten inserts 
  • 18 - 1 gram washers 
  • 4   - O-rings 
  • 12 - M3 x 6 long screws 
  • 2  -  set screws 

Supplied per kit : 

  • 1 - 222 Loctite®-1 ml 
  • 1 - T-10 Torx Driver 
View AllClose