This Rage 3RS is an STM primary designed with the stock offset allowing it to be used with the stock secondary. To take full advantage of an optimal setup we suggest using the STM Tuner driven Can-Am long post along with the Rage 3RS.
2015-2016 XMR models will require purchasing a 2014 clutch housing cover from the dealer to clear the clutching.
This clutch offers extremely smooth low engagement with improved torque.
New improved two-way bearing design. The main shaft bearing is now smaller with a 47mm outside diameter allowing a lower initial take off ratio than our past design. Allows tighter belt deflection and smoother transmission shifting.
An affordable replacement for the stock primary clutch. Complete billet design that out performs the existing primary. Using our adjustable SUPERTIP CAM ARMS with the Rage 3 is the perfect recipe for your stock or modified Can Am. These STM clutches will fit under the stock cover with no interference. The Rage 3 is capable of using most cam arms that are available on the market. We incorporate a fixed pin design that pivots the cam arm between two bushings and attaches the cam arm to the pin providing more durability to the cam arm pivot points. All parts are replaceable and stocked.
The cover is designed to use Polaris ATV springs which provides a wide variety of spring rates to choose from.
The Rage 3 comes calibrated with a spring and set of our own adjustable SUPERTIP CAM ARMS.
Includes a new bolt for installation.
Each clutch is assembled and setup to run the BRP OEM belt
This primary will work with the stock secondary.
Item numbers 1001070 Primary Clutch Holding Tool, 1001072 STM & Arctic Cat Spider Nut Socket Tool for 1995-2009 and either 1001020 STM Rage 3 & 6 Spider Tool, or 1001032 STM Rage 4 & 8 Spider Tool (depending on Rage number) is required when removing or installing the spider. Works on all STM primary clutches. Sold separately.
When ordering use this guide to help you pick options
Choose Engine HP – Let us know about your bike - Is it naturally aspirated/stock? Big Bore Kit? Does it have a turbo? If you choose turbo-how much boost? This gives us an idea of how to set the weights up. KEEP IN MIND WE CAN ONLY GET YOU CLOSE WITH WEIGHT SET UP. Everyone's riding style is different so it’s up to the customer to do the fine tuning!
All prices are in USD